Constrative Solution

Auto Adblue Nozzle is used for Dispensing of Adblue, Urea, Def.

MANUAL FLOW CONTROL

For use with manual & electric fuel pumps

All metal construction with the body, discharge spout, trigger & guard made from aluminum

Comes with a continuous flow switch for unattended dispensing

Designed for minimal back pressure 6-5/16" (160 mm) long Spout

Available in a choice of straight or curved spout, both with and without swivel

Flow rate:

Upto 75 LPM

Fluids:

Diesel, Kerosene & Petrol

Wetted Components:

Aluminum, Steel, Nylon, Nitrile Rubber, Zinc* *on models fitted with Hose Barb

• Dual Mode: Manual & Automatic.

   

  Sensor built into the discharge spout outlet automatically shuts off supply once fuel level in the tank reaches that of the outlet discharge spout

   

  Heavy-duty cast aluminum body, trigger & guard from thermoplastic & protective vinyl grip on the nozzle body

• Flow rate:

   

  Upto 110 LPM

• Max. Working Pressure:

   

  Upto 50 PSI (3.45 Bar)

• Wetted Components:

   

   

   

  Aluminium, Viton

• Fluids:

   

  Diesel, Kerosene, Petrol

• SUZZARABLUE A60

  SUZZARABLUE A60 is an automatic nozzle for AdBlue®. This nozzle is fitted with a device that automatically shuts off flow when the tank is full. Complete with swivel

  connector they conform to the strictest safety requirements and bear all necessary certifications.

  Also available version with K24 AdBlue® meter.

• Features

  Ready To Use

  Sturdy Design

  Stainless Steel Body

• READY TO USE
• TRANSPORTABLE
• CLAMPS FOR BATTERY CONNECTION

SUZZARABLUE PORTABLE KIT

SUZZARABLUE PORTABLE KIT is a AdBlue® transfer kit, available in AC and DC versions, suitable for all those conditions in which it is not possible to dispense directly from the dispenser, as in the case of earthmoving machines which, due to their size, are unable to refill there.

PRACTICAL AND SIMPLE

Thanks to its reliability and ease of use, SUZZARABLUE PORTABLE KIT is used in all those cases in which the dispensing or transfer of AdBlue® is required in special conditions or when only a battery power supply is available.

SUZZARABLUE PORTABLE KIT for AdBlue® is the most suitable solution to transfer and fill AdBlue® quickly, cleanly, in any condition.

RELIABLE OVER TIME

AdBlue® improves the performance of the diesel engine, reduces fuel consumption and nitrogen oxide (NOx) emissions produced by exhaust gases, thus preserving the environment according to the demanding specifications of ISO 22241.

Contamination of the solution occurs with poor quality materials, which is why the Suzzarablue portable kit guarantees quality by PIUSI’s Italian engineering.

The AdBlue® SUZZARABLUE PORTABLE transfer kit is equipped with SUZZARABLUE PUMP DC diaphragm electric pump with 12 V or 230 V motor without dynamic gaskets, SUZZARABLUE Manual nozzle in polyethylene, bottom valve that ensures a unidirectional flow, and terminal box with switch and fuse for overload protection. The kit is completed by 2 m. cables with battery connection pliers, 6 m. hose with 3/4" diameter, and suction kit with 1.5 m EPDM hose.

With a flow rate of up to 30 l/min, and a duty cycle of up to 20 minutes of operation, the AdBlue® SUZZARABLUE PORTABLE transfer kit is a portable AdBlue® transfer unit that provides a reliable industrial pump with self-priming capabilities. The solution is suitable for workshops that need a AdBlue® dispensing system that is both easy to install and simple to use, while at the same time looking for a quality product that is reliable over time.