Constrative Solution

The Piusi Bipump is a diesel transfer pump that is available in design and is tailored to the needs of those looking for a durable, high quality, high throughput pump that can be used in various industries. It is easy to install and is suitable for use on diesel dispensing units and stationary systems for fuel delivery as well as other applications.
Vane Transfer Pump Vane displacement pump for transferring diesel, characterised by high flow rate. .
Technical features:
Vane pump with rotor
Working cycle: 30 minutes.
Flanged 1 connectors
- Dry self-priming.
- Built-in pressure relief valve (bypass).
- Pump power: max. 85 litres per minute.
- Max. 1.2 bar.
- Power connection: 12/24 V; 500 W, 42/21 A.
- Connection: 1" i x 1" i
- Wide range of accessories available.
PUMP 24V DC 85lpm Piusi Diesel Transfer cw On / Off Switch
The Piusi Bi-Pump diesel transfer pump range are powerful, reliable and economical and are designed for high flow diesel transfer and refuelling.
This Piusi pump is ideal for refuelling large plant and agricultural vehicles and machinery, and can be used in either a fixed fuel installation or for mobile refuelling.
Ready to use complete refuelling battery kits are available containing these 24v and 12v fuel transfer pumps. 
Self-Priming Diesel Transfer Pump
Incorporated Bypass Valve
Flow rate: 85ltr Per Min Free Flow
On/Off Switch
1” BSP Flanged Inlet/Outlet Ports
Protection Grade: IP55

• Electric pump for waste oil evacuation

   

  Flexible impeller design enables pumping high viscosity fluids at high flow rate

   

  Motor with thermal overload protection to prevent over heating

   

  Self priming body can handle a wide variety of fluids

   

  Suction and Discharge Ports:

  Dual threads:

  1" NPT thread (F) and 1"-11.5 NH(M)

   

  Ideal for pumping used engine oil, transmission oil, hydraulic oil etc.

   

  Available in DC

   

  Duty Cycle:

  45 min ON/ 45 min OFF

• Do not use with:

   

  Gasoline, any flammable media

• STURDY STRUCTURE
• MECHANICAL METER
• INDUCTION THERMAL-PROTECTED MOTOR
• OVERLOAD PROTECTION
• BUILT-IN MESH FILTER
• IP 55

CUBE 56-70-90 is a diesel dispenser for non-commercial use that allows you to manage the transfer, dispensing and monitoring of fuel.

The characteristic of this diesel dispenser is that it can be adapted to different applications. In fact, it is possible to apply CUBE 56-70-90 on tanks, on the wall, on cisterns, on drums or on its special pedestal. CUBE 56-70-90 is suitable for different sectors: from the agricultural sector, the diesel transfer pump station can also be used in the logistics, automotive, construction and industrial sectors.

PRACTICALITY AND SIMPLICITY

The CUBE 56-70-90 fuel dispenser is equipped with a self-priming vane pump with bypass that ensures high performance. CUBE 56-70-90 as a diesel dispenser is installed on anti-vibration mounts for better comfort and practicality in use, while the mechanical seal and the thermal protection against overheating of the induction motor make the product reliable and safe.

The nozzle supplied is automatic with a swivel connection and the nozzle holder has a pump start/stop lever. The installation of the mesh filter on the suction side ensures a long life of the pump, because no foreign matter ends up in the rotor and causes a blockage and consequent breakage.

CONSUMPTION MONITORING

The CUBE 56-70-90 diesel dispenser also consists of a volumetric flow meter with oscillating disc for the management of the dispensing operations. The simple view allows you to monitor the quantity dispensed.

• Features
• Versatility
• Mobile And Ready To Use
• On/off Switch
• Drum Kit (On Request)

• BATTERY KIT

  Battery Kit is a portable diesel transfer kit. The diesel dispenser is equipped with a self-priming electric vane pump with a 12 or 24 V DC motor.

  Battery Kit is suitable for all those conditions in which the user has to transfer and dispense diesel in safe conditions, when, for example, only a battery power supply is available. The Battery Kit diesel dispenser has been designed to ensure a reliable and safe diesel transfer and dispensing in situations where the operation of refueling earthmoving machinery is complex.

   

  RELIABILITY OVER TIME

  The cast iron body makes the Battery Kit robust and durable. Thanks to its compactness, reliability and easy installation, the Battery Kit diesel transfer kit is used in all those cases in which the dispensing or transfer of diesel in safe conditions for construction, marine or agricultural machinery is required. The weight, the small size of the pump and the handle applied to the body are each important features that make the Battery Kit easy to handle and usable in any working environment.

   

  SIMPLE USE

  One of the main features of the portable diesel transfer unit Battery Kit is to be flexible and quick to install. The flow rate of the electric pump, up to 45-80 l/min, ensures a quick transfer with a duty cycle of 30 minutes. The kit has a suction capacity of up to 2 mt and is equipped with 2mt long cables with battery connection pliers, a 4 mt long hose for fuels with a diameter of 3/4", an aluminum manual nozzle and a bottom filter for the suction hose, which guarantees the quality of the diesel delivered, free from impurities.

Heavy duty industrial grade fuel pumps.

Designed for everyday use in agricultural, construction, automotive & industrial applications

Lightweight, yet strong noncorroding aluminium die-cast construction. Weather proof for tough outdoor use

Geared pump design using precision sintered metal gears

Geared construction makes the pump tolerant to contaminants in fuel; in addition to offering tremendous suction & minimal noise

UL & cUL listed Motor

DUTY CYCLE

30 minutes ON /

30 minutes OFF.

WETTED COMPONENTS

Aluminum, Steel,

Cast Iron, Nylon, NBR,

Zinc, Viton, Stainless Steel

RECOMMENDED USE

Gasoline, Diesel, E15 Fuel,

Kerosene, Bio Diesel (B20)

Flow rate:

Upto 57 LPM

Fluids:

Diesel, Kerosene, Bio Diesel, Gasoline

• Features
• Versatility
• Mobile And Ready To Use
• On/off Switch
• Drum Kit (On Request)

• BATTERY KIT

  Battery Kit is a portable diesel transfer kit. The diesel dispenser is equipped with a self-priming electric vane pump with a 12 or 24 V DC motor.

  Battery Kit is suitable for all those conditions in which the user has to transfer and dispense diesel in safe conditions, when, for example, only a battery power supply is available. The Battery Kit diesel dispenser has been designed to ensure a reliable and safe diesel transfer and dispensing in situations where the operation of refueling earthmoving machinery is complex.

   

  RELIABILITY OVER TIME

  The cast iron body makes the Battery Kit robust and durable. Thanks to its compactness, reliability and easy installation, the Battery Kit diesel transfer kit is used in all those cases in which the dispensing or transfer of diesel in safe conditions for construction, marine or agricultural machinery is required. The weight, the small size of the pump and the handle applied to the body are each important features that make the Battery Kit easy to handle and usable in any working environment.

   

  SIMPLE USE

  One of the main features of the portable diesel transfer unit Battery Kit is to be flexible and quick to install. The flow rate of the electric pump, up to 45-80 l/min, ensures a quick transfer with a duty cycle of 30 minutes. The kit has a suction capacity of up to 2 mt and is equipped with 2mt long cables with battery connection pliers, a 4 mt long hose for fuels with a diameter of 3/4", an aluminum manual nozzle and a bottom filter for the suction hose, which guarantees the quality of the diesel delivered, free from impurities.

• Features
• Sturdy Structure
• Flanged Components
• Anti-noise Filter
• Thermal Protection
• Built-in Bypass Valve
• Suction Pipe With Integrated Filter
• Ul Listed Motor Available

• PIUSI EX50

  Piusi EX50 is a complete pump transfer kit expressly engineered for ATEX/IECEx areas, and non-commercial use. It is therefore suitable for the transfer of gasoline, kerosene and diesel. It is perfect if you're looking for a solution for transferring flammable liquids from a drum.

   

  PIUSI EX50 IS ATEX CERTIFIED

  The transfer unit complies with the European ATEX directives to ensure maximum safety in its use with flammable liquids.

   

  SIMPLICITY AND VERSATILITY

  Piusi EX50 connects easily to drums with the 2" connector. The cast iron body makes the overall construction sturdy and compact and the installed motor is able to dispense up to 50 l/min with reduced absorption to guarantee a durable product.

  The transfer unit is a complete solution that includes: a telescopic suction hose for direct connection to the drum and housing for the nozzle located near the pump, which is located above the drum for a clean and efficient use of the fuel dispenser.

  The anti-noise filter (EMC electromagnetic compatibility) and the thermal protection make Piusi EX50 a safe and reliable fuel dispenser. The connections are quick and safe because the pump, flow meter and filters which can be mounted or replaced are flanged and do not require sealant.

  Piusi Drum EX50 features a built-in bypass valve, a non-return valve and an overpressure relief valve.

  The entire suction unit is integrated with an additional filter.

PIUSI HAND PUMP FOR DIESEL

Piusi Hand Pump is a manual vane pump specifically designed for the transfer of diesel and diesel fuel.

Developed and engineered by the Piusi R&D team, this manually operated pump is completely manufactured in the Suzzara production plant (Mantua, Italy) and is suitable for all drum applications (including 2" BSP connection) and for different industries: from mining to construction, automotive, transport, workshops and agriculture, to name but a few. This PIUSI diesel rotary pump is ideal for topping up and transferring diesel from drums.

MADE IN PIUSI, MADE IN ITALY

The Piusi Hand Pump manual diesel transfer pump is made of wear-resistant materials (stainless steel and technopolymers for the pump body and the latest generation technopolymers for the rotor and vanes) that ensure perfect operation and a highly smooth rotation over time for professional performance, even in heavy working conditions and with a flow rate of 38 litres per 100 revolutions.

SUITABLE FOR DIFFERENT USES

The Piusi Hand Pump is a manual pump for diesel fuel, characterized by a rotation lever, in sturdy steel, designed to ensure the best grip and complete with a practical non-slip handle. With the internal rotor designed by Piusi, this manual diesel transfer pump has an optimized suction capacity unlike the hand pumps available on the market. The dispensing hose is flexible and has a maximum length of 3 mt. The Piusi Hand Pump for diesel transfer is also available in the version with a stainless steel spout.

MAIN FEATURES

• Optimized suction capacity
• Sturdy connector
• Lever for heavy working conditions
• Smooth rotation
• High efficiency
• Adjustable suction pipe
• Long life
• Selected materials
• 100% tested

Choose the design, performance and reliability of 100% made in Piusi products

The PANTHER DC is a rotary, self-priming vane pump suitable for all applications
in which important flow rates are required. This equipment is fitted with an incor-
porated filter (500µ) and by-pass valve. The 24/12 V version can be used with
both voltages

• FSI Fuel Transfer Pump, ideal for use on stationary tanks, fixed fuel transferring systems & dispensers and other similar industrial applications

   

  Lightweight, yet strong non corroding aluminium die cast construction

   

  Self priming vane pump

   

  Continuous Duty Cycle with thermal overload protection

• Flow rate:

   

  Upto 80 LPM

• Wetted Components:

   

  Aluminium, Nitrile Rubber, Steel, Nylon

Heavy duty industrial grade fuel pumps.

Designed for everyday use in agricultural, construction, automotive & industrial applications

Lightweight, yet strong noncorroding aluminium die-cast construction. Weather proof for tough outdoor use

Geared pump design using precision sintered metal gears

Geared construction makes the pump tolerant to contaminants in fuel; in addition to offering tremendous suction & minimal noise

UL & cUL listed Motor

DUTY CYCLE

30 minutes ON /

30 minutes OFF.

WETTED COMPONENTS

Aluminum, Steel,

Cast Iron, Nylon, NBR,

Zinc, Viton, Stainless Steel

RECOMMENDED USE

Gasoline, Diesel, E15 Fuel,

Kerosene, Bio Diesel (B20)

Flow rate:

Upto 57 LPM

Fluids:

Diesel, Kerosene, Bio Diesel, Gasoline